AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |
Back to Blog
Stl files for 3d printing bicycles1/15/2024 My design is included but uses 45x90mm aluminum t-slot rails. You will need some form of assembly/alignment jig. Use a rotary tool to cut and gradually bring tube cuts to shape. Use 3D printed templates to mark tubes using the spacing between templates provided in the documentation. When in doubt, favor wall thickness to infill percentageĬustom supports are designed into the parts and should be sufficient at least with the CarbonX material (except the Rear Brake Mount part, that will likely need auto generated supports for the bridge area.)ġ8x16x1000 mm - or - 18x15x1000mm - chainstaysġ5x13x1000 mm - or - 15x12x1000mm - seatstays (2 pieces) Material: CarbonX EZ-PC from 3DXtech or similar structural materialĦ perimeters extrusion width = 3.9mm wall thickness) or moreĥ0-70% infill for headtube, rear brake mount, seat tube to top tube and bottom bracket Google Drive shared folder with STL files and Documents. ![]() ![]() See full playlist for more info on the build.
0 Comments
Read More
Leave a Reply. |